N2320 0038 AT UN
POMBASFUltraform® N2320 0038 AT UN는 비강화 POM 등급입니다. Thermal Break Strip 등 건축 단열 부품에 적합합니다.
물성치 데이터
Typical values for uncoloured product at 23°C
물성 데이터가 아직 등록되지 않았습니다.
기술 자료
관련 Grade (POM)
Injection molding grade for parts requiring high stiffness and strength together with good mold release. Abbreviated designation according to ISO 1043: POM-GF25 Designation according to ISO 9988-1: POM-K, M-GNR, 02-003, GF25
Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress. Abbreviated designation according to ISO 1043-1: POM-HI Designation according to ISO 29988-POM-K,,M-GNPR,2-1
Z2320 003 AT 03/2026 POM Guoco Midtown #18-01, 128 Beach Road, Singapore 189773 Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,6-2
Emission optimized,very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,5-2
Emission optimized, easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,4-2 Processing In order to obtain best emission performance it is recommended to process at comparatively low melt temperatures with pre-dried material. Furthermore avoid high screw speed, high shear and long cycle times. Additional information is available upon request.