Ultraform N2200 G53 AT
POMBASFInjection molding grade for parts requiring high stiffness and strength together with good mold release. Abbreviated designation according to ISO 1043: POM-GF25 Designation according to ISO 9988-1: POM-K, M-GNR, 02-003, GF25
물성치 데이터
Typical values for uncoloured product at 23°C
| 물성 항목 | 시험 방법 | 단위 | 건조 (Dry) |
|---|---|---|---|
| properties | |||
| Abbreviated designation according to | ISO 1043 | : POM-GF25 | |
| Designation according to bag and the 1000 kg Oktabin (octagonal container). Ultraform® is not subject to change when it is stored in dry, ventilated rooms. After relatively long storage (>1 year) or when handling material from previously opened containers, preliminary drying is recommended in order to remove any moisture which has been absorbed. should be taken to ensure ventilation and venting of the work area, preferably by means of an extraction hood over the barrel unit. almost exclusively of formaldehyde, a gas which has a pungent smell even at very low concentrations and irritates the mucous membranes. Decomposition can rapidly result in the build-up of a high gas pressure in the barrel of the processing unit. If the die is sealed there may be a sudden release of pressure via the filling hopper. halogenated fire protection agents, must be avoided under all circumstances. Even small quantities can cause uncontrolled and rapid decomposition of Ultraform® during processing. established by suitable trials. Processing with incompatible masterbatches may result in decomposition and release of gaseous formaldehyde. acid) since they cause Ultraform® to decompose. fax +49-621-60-78730. that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. | ISO 9988-1 | : | |
| Polymer abbreviation | - | - | POM-GF25 |
| Density | ISO 1183 | kg/m³ | 1580 |
| Melt volume rate MVR 190 °C/2.16 kg | ISO 1133 | cm³/10min | 4 |
| Moisture, max. | - | % | 0.2 |
| Dryer temperature | - | °C | 100 |
| Drying time | - | h | 3 |
| Melt temperature range | - | °C | 190 - 220 |
| Melt temperature, optimal | - | °C | 210 |
| Mold temperature range | ISO 294 | °C | 60 - 120 |
| Mold temperature, optimal | - | °C | 100 |
| Residence time, max. | - | min | 10 |
| Temperature hopper throat | - | °C | 80 |
| Cylinder temperature 1 (feed zone) | - | °C | 205 |
| Cylinder temperature 2 (compression) | - | °C | 205 |
| Cylinder temperature 3 (metering-zone, in front of the screw) | - | °C | 210 |
| Cylinder temperature 4 (nozzle) | - | °C | 210 |
| Peripheral screw speed | - | m/s | 0.3 |
| Molding shrinkage (parallel) | ISO 294-4 | % | 0.70 |
| Molding shrinkage (normal) | ISO 294-4 | % | 1.40 |
기술 자료
관련 Grade (POM)
Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress. Abbreviated designation according to ISO 1043-1: POM-HI Designation according to ISO 29988-POM-K,,M-GNPR,2-1
Z2320 003 AT 03/2026 POM Guoco Midtown #18-01, 128 Beach Road, Singapore 189773 Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,6-2
Emission optimized,very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,5-2
Emission optimized, easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,4-2 Processing In order to obtain best emission performance it is recommended to process at comparatively low melt temperatures with pre-dried material. Furthermore avoid high screw speed, high shear and long cycle times. Additional information is available upon request.
Easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,4-2