N2320 003
POMBASFUltraform® N2320 003은 비강화 POM 범용 등급입니다. 뛰어난 내마모성, 저마찰 계수, 높은 스프링 탄성을 보유하며, 기어, 클립, 스냅핏 등 정밀 기구 부품에 적합합니다.
물성치 데이터
Typical values for uncoloured product at 23°C
| 물성 항목 | 시험 방법 | 단위 | 건조 (Dry) |
|---|---|---|---|
| properties | |||
| Density | ISO 1183 | g/cm³ | 1.41 |
| MVR (190°C/2.16kg) | ISO 1133 | cm³/10min | 7.5 |
| Moisture absorption (23°C, sat.) | ISO 62 | % | 0.8 |
| mechanical | |||
| Tensile modulus | ISO 527-1/2 | MPa | 2700 |
| Tensile stress at yield | ISO 527-1/2 | MPa | 65 |
| Tensile strain at break | ISO 527-1/2 | % | 35 |
| Charpy notched impact (23°C) | ISO 179/1eA | kJ/m² | 7 |
| Charpy unnotched impact (23°C) | ISO 179/1eU | kJ/m² | 250 |
| Flexural modulus | ISO 178 | MPa | 2600 |
| thermal | |||
| HDT/B (0.45 MPa) | ISO 75-1/2 | °C | 158 |
| HDT/A (1.80 MPa) | ISO 75-1/2 | °C | 105 |
| Vicat softening temperature | ISO 306 | °C | 160 |
기술 자료
관련 Grade (POM)
Injection molding grade for parts requiring high stiffness and strength together with good mold release. Abbreviated designation according to ISO 1043: POM-GF25 Designation according to ISO 9988-1: POM-K, M-GNR, 02-003, GF25
Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress. Abbreviated designation according to ISO 1043-1: POM-HI Designation according to ISO 29988-POM-K,,M-GNPR,2-1
Z2320 003 AT 03/2026 POM Guoco Midtown #18-01, 128 Beach Road, Singapore 189773 Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,6-2
Emission optimized,very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,5-2
Emission optimized, easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts. Abbreviated designation according to ISO 1043-1: POM Designation according to ISO 29988-POM-K,,M-GNR,4-2 Processing In order to obtain best emission performance it is recommended to process at comparatively low melt temperatures with pre-dried material. Furthermore avoid high screw speed, high shear and long cycle times. Additional information is available upon request.